Calf Feeders

Loading...
207 386
$19.95 inc. GST
207 389
$11.95 inc. GST
Easy Feeder and Speedy Feeder are made by Shoof. Easy Feeder is a single-speed nursing bottle and the Speedy Feeder is three-speed. With Speedy Feeder when you get a real fast drinker, switch to ‘Fast’ and let him go for it. When you have a weak premature-born calf, needing careful feeding, switch to ‘Stop’ or ‘Slow’ and let him take milk as he can cope without drowning. The three speeds control the air inflow to the bottle, and thus the milk outflow. Reduce time wasted on speedsters and prevent drowning weaklings, all using the same bottle and teat.
These feeders also feature intelligently designed bottle with multi-directional easy-grip hand hold. The teat is mounted low in the cap to empty the bottle contents completely. The wide 70mm-diameter neck ensures easier filling and cleaning, and the coarse-thread cap is quick and easy to fit. The wide base gives the bottle maximum stability when standing. Spare teats are supplied as fitted teat/cap assemblies, green cap for Easy Feeder and blue cap for Speedy Feeder, or as bare teat. (Teat replacement needs some strength to achieve.)
207 404
$29.95 inc. GST
213 731
$39.95 inc. GST
Easy Feeder and Speedy Feeder are made by Shoof. Easy Feeder is a single-speed nursing bottle and the Speedy Feeder is three-speed. With Speedy Feeder when you get a real fast drinker, switch to ‘Fast’ and let him go for it. When you have a weak premature-born calf, needing careful feeding, switch to ‘Stop’ or ‘Slow’ and let him take milk as he can cope without drowning. The three speeds control the air inflow to the bottle, and thus the milk outflow. Reduce time wasted on speedsters and prevent drowning weaklings, all using the same bottle and teat.
These feeders also feature intelligently designed bottle with multi-directional easy-grip hand hold. The teat is mounted low in the cap to empty the bottle contents completely. The wide 70mm-diameter neck ensures easier filling and cleaning, and the coarse-thread cap is quick and easy to fit. The wide base gives the bottle maximum stability when standing. Spare teats are supplied as fitted teat/cap assemblies, green cap for Easy Feeder and blue cap for Speedy Feeder, or as bare teat. (Teat replacement needs some strength to achieve.)
The EXCAL tube and teat stop-valve is a one-piece plastic moulding with a stainless steel ball. The valve stem is 7.7mm o.d., suitable for plastic tube with i.d. from about 6mm to 7mm. Valve length 23mm o.a. Diameter 13mm at maximum. The stop valve can assist the calf suckling. Available as 10-pack only.
Milk Train is the modular calf feeding bucket that is used as a 2-place feeder, or is dove-tailed together to make 4, 6 or 8 place feeders. Milk Train is easy to carry about with the central handle, even when full of milk. The new adjustable latch-strap system makes for quick and easy connection to any type of rail, pipe or wood, up to 40mm diameter, or 150mm deep. Simply pull strap upwards to lock onto fence or gate rail. Milk Train for calves holds a total of 10 litres with two 4-litre individual chambers. Supplied with our famous EXCAL Big Softy teats, complete with intake elbow/valves. Feeders stack with teats on for carry or storage. Place over a central rail to feed two individual pens. Feeder is 42cm long o.a.
207 391
$14.95 inc. GST
Used in Australia for many years, the EXCAL calf feeder features the well-proven EXCAL Fast-flow teat, with non-return valve in the back to help weak or new-born calves start suckling. The air valve can be covered with finger or thumb if suckling is too fast. A good nursing bottle at a great price. Volume 2 litres.
**Includes replacement air valve for bottle.
The rail-hanging M1 is easiest to use. The strong plastic rail-hooks have grip teeth and high tensile strength to firmly grip any rail, wood or pipe, up to 38mm (1½”) thick.
210 462
$49.95 inc. GST
An improved bottle for feeding meal or ‘starter’ dry feeds to calves. The special teat feeds the meal just like feeding milk. Suckling action makes the calf produce greater saliva than when feeding from bucket or trough, thus aiding digestion. Calves can start on this feeder as a supplement feed from 1 or 2 weeks old. No waste or mess. Feed is always clean and dry. Supplied complete with screw-on plastic mounting bracket. Optional extra, strong steel bracket available, especially for use by large strong calves. Also optional is a milk-feeding teat so bottle can be used as normal milk feeder when required. Bottle capacity 4 litres.
NB: Teat slit should be vertical for correct operation. Teats also fit Braden bottles. Secure plastic bracket to rail before attempting to attach feeder to it. We recommend use of optional steel mounting bracket.
213 671
$19.95 inc. GST
Using our floating dummy is the easy way to teach a calf to drink from a bucket. Large and stable float, with one-way suckling valve.
207 401
$139.00 inc. GST
The 20-litre EXCAL Rail Bucket is a 6-place calfeteria-type feeder. Simply hang on any convenient rail, up to 32mm (1.25”) thick. The teats are Shoof ‘Big Softy’, fast flow and no leaks, complete with intake elbow/valves.
218 208
$255.00 inc. GST
218 206
$49.95 inc. GST
This is a modular, extendable feed trough system from Europe. It is made of reinforced polypropylene which will stand lots of rough use. Use these troughs indoors or out. Set up as a single 2m-long trough, or join together as required. Use end caps to complete. Troughs are slotted and pilot-drilled to allow easy assembly. Screws are supplied with end caps. Suitable for calves, sheep, pigs or other animals.
202 845
$179.00 inc. GST
Big strong rigid-plastic trough suitable for dry or liquid feed.Hooks suit rail or pipe up to 62mm thick. Capacity 50kg or 50 litres.All rounded inside and out for cleanliness and animal safety. Length 1.2m o.a. Drain plug available.
209 593
$49.95 inc. GST
PVC tubing specially for use in tube-delivery type calfeterias and calf feeding buckets. This tubing fits all EXCAL teats and components, such as tube grommets and tube stop valves. Also suitable all New Zealand-manufactured teats. Dimensions: 11mm o.d. x 6mm i.d.